Altego OMNI
100% custom geometry
No compromise on geometry. Use our AI-assisted geometry configurator, based on your body dimensions, to give you the perfect riding position and ideal weight distribution. Check our tutorial to learn how to measure yourself, enter your measurements, and review our suggestion. Or directly enter your custom geometry if you already know what you want.
7075-T6 aluminium
Aerospace-grade material, around 60% higher ultimate tensile strength than 6061-T6 aluminium. Bonded frame with structural adhesive, meaning no heat-affected zones. 99% recyclable.
Patent-pending half-lug construction
Combining screws, internal reinforcement, and structural adhesive for an exceptionally strong assembly: tubes secured against pull-out and ultra-strong lugs. No pivot threads in the frame for ultimate durability.
Lifetime warranty
Lifetime warranty for the first owner, because we know our bikes are built to last.
EFBE CAT 5 (DH) approved
Certified to meet one of the highest and most demanding bicycle test standards, ensuring strength, safety, and confidence when riding hard.
All modern options
- UDH
- In-frame storage
- Deep seatpost insertion
- Standard internal cable routing or headset routing
- Water bottle mount
- Threaded bottom bracket
- Integrated frame protection: chainstay, seatstays, and rock guard for minimal noise and maximum protection
Most common standards
Built around widely available, easy-to-source standards:
| Headset | included ZS56 / ZS56 (choose standard cable routing or headset routing) |
| Rear hub spacing | 12×148 mm |
| Rear brake mount | Post Mount 200 mm (or 180 mm with a separately sold adapter) |
| Shock size (175mm travel) | 205x65mm Trunnion |
| Shock size (160mm travel) | 205x65mm Trunnion |
| Shock hardware (bottom) | 30×8 mm |
| Bottom bracket | 73 mm threaded |
| Chainline | Boost 52 mm or Boost Wide 55 mm (recommended) |
| Chainguide | ISCG-05 |
| Seatpost diameter | 31.6 mm (or 30.9 mm with a separately sold adapter) |
| Seatpost clamp | included 40 mm |
| Bearings | 3×6903 (main pivot) / 2×6002 (rocker pivot) / 2×6902 (trunnion mount) / 2×4×6802 (chainstay-to-seatstay & seatstay-to-rocker) |
Consistent kinematics
Whatever your geometry, your bike will retain consistent kinematics. Choose your level of progressivity in the configurator, and whatever geometry you choose, always get 100% anti-squat at sag (±5%) and controlled anti-rise throughout the travel (60% ±5%) for maximum predictability and active suspension under braking.
Manufactured in France
Manufactured in-house with high precision and tight tolerances, quality-controlled, and shipped from the South West of France.